Basic pc recording
First thing's first - what is your purpose of recording on a PC? Are you doing it for fun? Are you an up-and-coming producer? Or are you trying to upgrade your current recording setup? I will be covering the aspect of simple, basic recording on a PC. Read on. Let's take a look at how sounds get recorded into your computer and get spit out of your speakers. Whether you have a set of turntables, a microphone, drum machine, sampler, etc., you will need to somehow plug your gear into your computer's sound card. Let's say you have a SoundBlaster Live soundcard installed on your PC. When you take a look at the soundcard, you can see that it has an input and output. But they're not RCA plugs, what are they? 1/8 inch. So what you'll need to do is get some wires that have 1/8 inch at one end and RCA at the other end. You need the sound to travel like this: RCA OUT of your drum machine, sampler, etc., If you have multiple pieces of gear and you would like to hook them all up together, you'll need to either connect all of them to a mixer and then go to your soundcard, or
connect them via MIDI, but I won't get into all of that this time. Once the sound is recorded into your computer with a software program, you can do whatever you want. If you want to use your computer just to edit some sounds, then you'll only need a basic program like Sound Forge. Obviously this article is meant for beginners, with just a very basic introduction in to how recording on your PC works. It then sends the sound out of the soundcard, through the OUT slot. The sound is now able to pass through the soundcard and recorded into your computer. There's a whole variety of programs to choose from, depending on your needs. Some of those programs are sequencers, some are editors. With programs like Cakewalk, you can actually control some of your equipment! You can set up your drum machine, for example, so that it responds to messages sent from Cakewalk. Once it's all ready, you hit record and the software will send a message to your drum machine telling it, "Play now!" and the drum machine will respond and start playing. If you're just starting out, you can check out programs like Acid, Sound Forge, Cool Edit Pro, Cubase, Cakewalk, Logic Audio, etc. If you have a separate CD burner (one that is not installed on your computer), you can treat it somewhat like a DAT machine. You might be able to send sounds into a DAT machine, to be recorded there, or to a CD burner. Soundcards There are too many to name, but even the most basic soundcard will do nowadays, but it all depends on what you want to accomplish and how good you want the sound to be. That's where you hook up another wire going from the soundcard's OUT to the IN of your amp.
Common topics in this essay:
Sound Forge,
SoundBlaster Live,
MIDI SPDIF,
Read Let's,
PC Recording,
Logic Audio,
drum machine,
1/8 inch,
cd burner,
software program,
dat machine,
recording pc,
recorded computer,
sound soundcard,
machine sampler etc,
computer software,
computer software program,
cd burner installed,
installed computer,
drum machine sampler,
burner installed computer,
|
Acceptance Essays
