respraying a car
In order to do a proper job you must first look over the whole car top to bottom and either write a list of all the dent and rust spots or take photos. If some panels need replacement write down what it is and the year and make of your car, weather it is a sedan or station wagon or ute e.t.c. Once you have found all work that has to be done you need to write a list of the estimated amount of body filler, sand paper and primer is needed. Once all this preliminary work is done you can start work on your car.It is best to start from the roof down. This is because of over spray, which is annoying and harder to work with in later stages. You sand, remove any rust and dents using body filler and then primer the whole area which will also fill
You first need to mask up whatever you do not want sprayed like windows, lights, wheels, e. You have to mask up the windows with masking tape and paper so they do not get any over spray on themOnce your car is prepared for painting there is no rush. Any outdoor area will not be good enough. But if you can you first have to sand the primer just a little to smooth it out. You need an air compressor and a heavy-duty spray gun, you also need your choice of paint that amounts to about 4 litres, you also need clear coat lacquer, which is about 5 litres, and thinners that is about 20 litres. You then move on to the doors, which again if are replaced, work on them before applying them. Once sprayed you let it dry which takes 24 hours then apply another coat and do this again until you are satisfied with the colour. You can leave your car at this state if you can't find time spray it. Once you have all this you can spray the car. If you intend to spray the car yourself and you have no experience you should have a few lessons on how to use a spray gun because they have totally different characteristics to other spraying methods. You also should have good fluorescent lighting so you can see everything. This is an added bonus because you can have the bonnet or boot on any angle or height to work on, its much more user friendly. If you have bought a new panel, work on it before applying it to the car.
Common topics in this essay:
,
spray car,
write list,
body filler,
spray gun,
|
Acceptance Essays
