How to change a flat tire
How to Change a Flat Tire on a Busy Road You can easily get sucker into paying more than fifty dollars for having a towing company change flat tire for you. Instead, you can save yourself money by doing it yourself. It is a simple process that takes less than half an hour. Most of the tools you need are already in your car. These tools include a Jack, a tire iron, a spare tire, and road flares. The first step is to set up the road flares. Flares are available at most department stores and are a very good idea to carry. Setting flares makes the car more visible, decreasing the chance of an accident while you are changing the tire. To properly set flares, you should have four of them. Take each flare and light it, following the directions on the package. After you light them, lay them on the ground in the following pattern. Lay the first one about fifty feet behind your car, and about four feet from the white line on the side of the road. Set the rest of the flares in a straight line, with the last one being about three feet from the driver's side rear corner of your car on the w
To do this you must take the rest of the tools out of your car. The car jack might be in the trunk, or it might be under the hood next to the engine. Some car manufacturers design their spares to travel only at slow speeds. Lower the car back to the ground, and remove the jack. There is a special way to tighten the lug nuts, if you do not do it this way, your tire may be on the hub crooked. Before you go, read the spare tire to see if there is any speed limitations. After tightening one lug, go directly across to tighten the next one, be sure to re-tighten all of the lug nuts at least four times. The tire iron is probably in the trunk along with the spare tire. It is easier to put the top ones on first, because this will keep the ire from falling off. This will allow you to jack up the car, even in the softest ground. There are pictures and written directions on the side of the jack, telling you where to use it. Put all five lug nuts back on and tighten them as much as possible. Tighten the lug nuts as tight as possible. They are close to the tires, and reinforced to hold the weight of the car. Do not remove the lug nuts at this time because it will cause the car to fall.
Common topics in this essay:
Busy Road,
lug nuts,
tire iron,
spare tire,
flat tire,
car jack,
remove lug nuts,
five lug nuts,
change flat tire,
tighten lug nuts,
tire hub,
lug nuts tire,
jack car,
tighten lug,
car tools,
weight car,
|
Acceptance Essays
