Energy Efficient Housing
Energy efficient windows have multiple layers of glass. The reason for this is because the more layers of glass you have the better it insulates the house. Three or four layers of glass are one of the best because you have more airspace in between layers. A smaller airspace doesn't insulate the building as well as a thicker airspace would. The thickest an airspace should be is 1 inch because any thicker than that will cause the glass of the window to no longer insulate the building. The air in between the layers of glass should be thick and dense, so that it can save energy. One of the most common airs used in-between glass is argon. When argon is used heat loss is reduced. You could also use carbon dioxide or sulfur hexa-fluoride between glass. Another type of window that is used commonly to keep the home cool is tinted glass. Tinted glass and tinted window films are used on buildings to reduce heat gain through windows. Advancements in tinted glass have now allowed us to make the glass appear just as a regular window that you can see through. The tinted glass solution is also used in many vehicles and private rooms for privacy and to keep them cool in the summer to save
Also, as many windows as possible should be able to be opened for cross-ventilation. Underneath the concrete you should have 2" of foam to retain the heat stored. On the exterior of the home, avoid planting too many trees or plants that will block the suns light. They don't always work that well in a climate that has sub-freezing temperatures. For rooms that occasionally need heating use lightweight materials (timber, plasterboard). It also conserves cement and protects insect damage from happening. Windows are a major part of the building so you should carefully consider where each one goes and what size it is. Heating and cooling buildings rely primarily on radiation heat transfer. The piping adds and removes heat to the water. Use a tamper-resistant, time delay, dual element, Type S fuse to protect circuits from over fusing, by strangers to the home. Electrical Wiring Electrical wiring is the main source of energy efficiency. Windows should be made longer on the south side of the house and smaller on the other sides. They are called horizontal-axis washers. 80 a year to use (not including the cost of a bulb).
Common topics in this essay:
Windows Energy,
North America,
Energy Solar,
Insulation Using,
Energy Rating,
ENERGY STAR,
Lights Energy,
Efficiency Rating,
Water Heaters,
Plumbing Penetrations,
energy efficient,
solar energy,
air conditioners,
water heater,
energy efficiency,
save energy,
insulate building,
solar panels,
air conditioning,
layers glass,
passive solar energy,
energy efficient windows,
bulb compact fluorescent,
heating air conditioning,
central air conditioners,
|
Acceptance Essays
