The Basic Guide of Tire Replacement is in a range of self-help books that clearly directs the user through steps on how to change a flat tire. With this guide, you will be able to quickly and effectively change any tire within minutes. There is no prior knowledge needed to perform this task. A person will be coached in how to properly place and use the jack, how to unbolt the tire, after which finally, how to replace the old tire with a new tire. The basic principle to remember is safety.
             The materials you will need are as follows:
             Figure 1 Figure 2 Figure 3
             These materials should be in the trunk of your vehicle, unless directed otherwise by vehicle operation manual.
             Warning: - replacing a tire is dangerous, if steps are not followed in the order directed. As always, a professional should be consulted with any questions.
             Major steps in changing a tire are (1) Raising the vehicle on a jack, (2) Removing the old tire, (3) Placing the new tire, (4) Lowering the vehicle.
             • To safely remove the tire, the car must be jacked up. Caution: the placement of the jack is extremely important, the misplacement or improper use of the jack can cause injuries.
             1. Take the jack (figure 1) and place it underneath the vehicle, before exact placement, check underneath for the reinforcement beam closest to the flat tire.
             2. After proper placement it is time to raise the vehicle, the jack should have a rod, when turned raises and lower the jack. Locate it.
             Warning: before raising the jack, make sure the vehicle is in park with the hand brakes on and the vehicle is on a flat road to perform the task safely.
             3. Turn the rod clockwise to raise the jack. (Counter-clockwise to lower it)
             4. Raise the car approximately a foot
             ...