This past summer I worked as a custodian in a manufacturing plant. Part of my
job was cleaning bathrooms. I estimate throughout the summer I cleaned up to five
hundred bathrooms. I consider myself an expert on the subject. Using my process for
cleaning bathrooms, an immaculate bathroom is achievable.
The initial step in the process is to gather all the necessary cleaning supplies: mop
and bucket, glass cleaner, floor soap, toilet bowl cleaner, toilet brush, paper towel, a
sponge, bathroom cleaning solution with bleach, toilet paper, trash bag, broom and dust
pan, and gloves are recommended. Make sure to read all of the labels on the cleaners for
warnings, to avoid possible hazards.
Next, everything must be removed from the room that is on the floor. This
included rugs, trash cans, and any garbage laying on the floor. After taking everything
Now it is time for the dirty work. This is where I suggest wearing gloves. Take
the toilet bowl cleaner and apply it to the inside of the bowl, underneath the rim. Now
using the brush, scrub the inside of the bowl making sure to remove all stains. After all
stains are removed, flush the toilet to reveal a clean bowl.
After cleaning the inside of the toilet, it is time to clean the outside. Using the
bathroom cleaner with bleach, spray the entire outside of the toilet. The bleach in the
cleaner kills the bacteria on the toilet, but it also can cause serious damage to clothing.
BE VERY CAREFUL WHEN USING BLEACH. Wipe the toilet with a moist sponge.
Be sure to clean the entire toilet including the base, the seat, and the tub behind the bowl.
When the sponge gets dirty, rinse it off in the sink. Continue cleaning the toilet until it is
Now that the toilet is completely clean, move over to the sink. Use the same
cleaner that was used to clean the toilet, however use a new spon
...